Analyser Slope

Your thoughts, comments, ideas, suggestions, criticism
Post Reply
PHM
Likes it here
Posts: 33
Joined: January 29th, 2013, 12:40

Analyser Slope

Currently white noise results in a flat spectrum curve (equal power per frequency band).
While listening to sound files with a full spectrum - full as perceived by the ear - and a high amplitude,
the low frequencies peak at the top of the analyser window - sometime higher than the peak meter itself.

I'd rather prefer it if something like pink noise would result in a quasi flat spectrum.

Attached a comparison of white noise and pink noise in resonics analyser and voxengo span.
All are peaking at -1.0 dBfs.

The curve of span theoretically needs a little offset upwards, but I think you can connect the dots anyway..
Attachments
slope.jpg
slope.jpg (79.41 KiB) Viewed 16192 times
Windows 7 Home Premium x64 (SP1)
Resonic Beta 0.6.3b

User avatar
MaxLapierre
Beta Tester
Posts: 53
Joined: January 30th, 2013, 00:27
Location: Canada
Contact:

Re: Analyser Slope

Yeah the high frequencies needs a boost.
I always use the log analyzer, it's way better than linear mode.

Tom, if you want inspiration for a nice spectrum analyzer, may i suggest you take a look at Winamp analyzer.
I know it's too small but I like the way the high frequencies are normalized (flat in relation to bass).

Thanks
www.MaxLapierre.com

Tom
Liqube Audio
Liqube Audio
Posts: 969
Joined: December 12th, 2012, 19:12
First Name: Tom
Primary DAW: Live
Location: Inside a face mask
Contact:

Re: Analyser Slope

PHM wrote:Currently white noise results in a flat spectrum curve (equal power per frequency band).
I'd rather prefer it if something like pink noise would result in a quasi flat spectrum.
Well, the former is the correct way of representing the spectrum and I'll likely be sticking to it for now as it matches my reference tests with most popular analyzers, including the one in SoundForge, WaveLab, and Waves PAZ.

How's SPAN set up?

See attached some quick comparisons, using SoundForge as reference. The vertical scale in Resonic Player is different, off course.
the low frequencies peak at the top of the analyser window - sometime higher than the peak meter itself.
That's true, and probably needs tweaking. The goal with the RTA in Resonic Player is to visualize what you're hearing in a musical way, while providing fairly accurate results. This should have a practical use while browsing through audio files. However, I'll be refining this further in future releases.

As I already mentioned Resonic Pro will have an accurate mode, with all the vertical scaling disabled and more options. We could also think about different scaling options here...
MaxLapierre wrote:Yeah the high frequencies needs a boost.
I already boost them, as part of the musical mode. But I won't exaggerate it or it might just look wrong and end up being useless for rough analysis.
If you want inspiration for a nice spectrum analyzer, may i suggest you take a look at Winamp analyzer
Oh my, you couldn't have picked a worse example ;) It's less than useless for metering.
Attachments
white reso.png
white reso.png (13.56 KiB) Viewed 16184 times
white sf.png
white sf.png (27.33 KiB) Viewed 16184 times
pink reso.png
pink reso.png (14.34 KiB) Viewed 16184 times
pink sf.png
pink sf.png (29.67 KiB) Viewed 16184 times
brown reso.png
brown reso.png (11.24 KiB) Viewed 16184 times
brown sf.png
brown sf.png (28.08 KiB) Viewed 16184 times
Join our Discord for chat and talk (not just Resonic related) and beta testing; or the Resonic Users group on FB.

A user interface is like a joke: if you have to explain it, it's not that good.

PHM
Likes it here
Posts: 33
Joined: January 29th, 2013, 12:40

Re: Analyser Slope

Tom wrote: Well, the former is the correct way of representing the spectrum and I'll likely be sticking to it for now as it matches my reference tests with most popular analyzers, including the one in SoundForge, WaveLab, and Waves PAZ.
I didn't know that all the other analysers use a slope of 0dB/octave and never realised that my span settings don't display true peak values of single frequencies. Enlightening :)
Tom wrote:That's true, and probably needs tweaking.
Yes, the frequency curve should be offset to true values then.
It simply doesn't make sense if one frequency peaks louder than the sum itself.
Tom wrote: The goal with the RTA in Resonic Player is to visualize what you're hearing in a musical way, while providing fairly accurate results. This should have a practical use while browsing through audio files. However, I'll be refining this further in future releases.
It's funny that you mention this. IMHO a slope of 3 or 4.5dB/oct displays the data musically and the 0dB/oct analytical (=true values).
As a matter of routine I got used to the perception that to my ears white noise sounds like high frequency hiss and therefore shouldn't result in a flat spectrum.

I would like to see a third mode with 4.5dB slope then ;)
Tom wrote:How's SPAN set up?
attachment: span settings + pink noise peaking at around -12db dBfs
Attachments
span-settings.jpg
span-settings.jpg (236.88 KiB) Viewed 16178 times
Windows 7 Home Premium x64 (SP1)
Resonic Beta 0.6.3b

Tom
Liqube Audio
Liqube Audio
Posts: 969
Joined: December 12th, 2012, 19:12
First Name: Tom
Primary DAW: Live
Location: Inside a face mask
Contact:

Re: Analyser Slope

PHM wrote:It's funny that you mention this. IMHO a slope of 3 or 4.5dB/oct displays the data musically and the 0dB/oct analytical (=true values).
Not just the scale, dynamic fall-offs as well. But, yes.
As a matter of routine I got used to the perception that to my ears white noise sounds like high frequency hiss and therefore shouldn't result in a flat spectrum.
Does actually make sense.
I would like to see a third mode with 4.5dB slope then ;)
Well, there's definitely a lot of room to play with analyzer options, adjustments, and modes... so why not. I'll be playing around with this in the Pro version, but for the time being I'll have to leave it as it is as there are more pressing issues I need to focus on. Hope you understand.

Just keep your ideas and suggestions coming, especially on the analyzer topic please!
attachment: span settings + pink noise peaking at around -12db dBfs
Aight.
Join our Discord for chat and talk (not just Resonic related) and beta testing; or the Resonic Users group on FB.

A user interface is like a joke: if you have to explain it, it's not that good.

Tom
Liqube Audio
Liqube Audio
Posts: 969
Joined: December 12th, 2012, 19:12
First Name: Tom
Primary DAW: Live
Location: Inside a face mask
Contact:

Re: Analyser Slope

Join our Discord for chat and talk (not just Resonic related) and beta testing; or the Resonic Users group on FB.

A user interface is like a joke: if you have to explain it, it's not that good.

PHM
Likes it here
Posts: 33
Joined: January 29th, 2013, 12:40

Re: Analyser Slope

In the end I wanted to express something along those lines..
From a psycoacoustic point of view, the most relevant analyzer is one that shows pink noise as flat (no slope), since this relates more closely to the auditory system, which is akin to a band of one-third octave frequency.
with the following qualification: most relevant at least to me ;)
Well, there's definitely a lot of room to play with analyzer options, adjustments, and modes... so why not. I'll be playing around with this in the Pro version, but for the time being I'll have to leave it as it is as there are more pressing issues I need to focus on. Hope you understand.
Definitely understand! Just wanted to touch upon the analyser topic.

Thank's again!
Windows 7 Home Premium x64 (SP1)
Resonic Beta 0.6.3b

Tom
Liqube Audio
Liqube Audio
Posts: 969
Joined: December 12th, 2012, 19:12
First Name: Tom
Primary DAW: Live
Location: Inside a face mask
Contact:

Re: Analyser Slope

PHM wrote:In the end I wanted to express something along those lines..
From a psycoacoustic point of view, the most relevant analyzer is one that shows pink noise as flat (no slope), since this relates more closely to the auditory system, which is akin to a band of one-third octave frequency.
with the following qualification: most relevant at least to me ;)
Yep!

Feel free to post anything that comes to mind!

After all I'm here to make Resonic better, so any input is welcome.
Join our Discord for chat and talk (not just Resonic related) and beta testing; or the Resonic Users group on FB.

A user interface is like a joke: if you have to explain it, it's not that good.

Tom
Liqube Audio
Liqube Audio
Posts: 969
Joined: December 12th, 2012, 19:12
First Name: Tom
Primary DAW: Live
Location: Inside a face mask
Contact:

Re: Analyser Slope

PHM wrote:While listening to sound files with a full spectrum - full as perceived by the ear - and a high amplitude,
the low frequencies peak at the top of the analyser window - sometime higher than the peak meter itself.
Fixed this in the next alpha (8xx).
Join our Discord for chat and talk (not just Resonic related) and beta testing; or the Resonic Users group on FB.

A user interface is like a joke: if you have to explain it, it's not that good.

User avatar
wshaper
Beta Tester
Posts: 94
Joined: September 23rd, 2013, 21:06
Primary DAW: Reaper, Live

Re: Analyser Slope

Hi
Did you ever considered Comparisonicsdisplay ?
Image

Tom
Liqube Audio
Liqube Audio
Posts: 969
Joined: December 12th, 2012, 19:12
First Name: Tom
Primary DAW: Live
Location: Inside a face mask
Contact:

Re: Analyser Slope

wshaper wrote:Hi
Did you ever considered Comparisonicsdisplay ?
Yep, actually I've been working on a proof-of-concept about a year ago, then dropped it because it'd require reworking certain parts from scratch which I wasn't ready to do at that time, concentrating on the more essential features first. Also it'd blow up the size of the waveform cache.

However, I really want to bring this back. The original motivation behind it is wanting to visualize the bass frequencies, especially in loudness war times where your average music waveform looks like a filled rectangle ;)
Join our Discord for chat and talk (not just Resonic related) and beta testing; or the Resonic Users group on FB.

A user interface is like a joke: if you have to explain it, it's not that good.

User avatar
wshaper
Beta Tester
Posts: 94
Joined: September 23rd, 2013, 21:06
Primary DAW: Reaper, Live

Re: Analyser Slope

yipee !

User avatar
ExtremRaym
Beta Tester
Posts: 50
Joined: April 12th, 2014, 18:35
Artist Handle: X-Raym
Primary DAW: Reaper
Location: France
Contact:

Re: Analyser Slope

Comparisonics on the to-do list.... AWESOME !!

(+1 for Analyser Slope improvements)

User avatar
wshaper
Beta Tester
Posts: 94
Joined: September 23rd, 2013, 21:06
Primary DAW: Reaper, Live

Re: Analyser Slope

Nice.

Tom
Liqube Audio
Liqube Audio
Posts: 969
Joined: December 12th, 2012, 19:12
First Name: Tom
Primary DAW: Live
Location: Inside a face mask
Contact:

Re: Analyser Slope

Well, I wouldn't be using Comparisonics though, which would be off the table anyways - licensing cost and all.

Guess I'll revisit my own code some day. See "fluid waveform" #007, #008, #012 @ http://resonic.at/labs
Join our Discord for chat and talk (not just Resonic related) and beta testing; or the Resonic Users group on FB.

A user interface is like a joke: if you have to explain it, it's not that good.

User avatar
ExtremRaym
Beta Tester
Posts: 50
Joined: April 12th, 2014, 18:35
Artist Handle: X-Raym
Primary DAW: Reaper
Location: France
Contact:

Re: Analyser Slope

So bad for Comparisonics but I understand... and your fluid waveform" #007, #008, #012... Waoh :) GREAT !!!

I want it in my DAW now ! :D

Post Reply